Double Glazing Seal Repairs
If double glazing window seals fail this can lead to mould and damp. This could cause damage to the frame as well as the walls surrounding it, in addition to affecting your health.
Resealing is a cheaper way to fix most uPVC window frames rather than replacing them. A glazier can clean the frame and the glass of the window. They will apply a fresh bead and smooth it.
Water Leaks
Window seals are designed to keep water out of your home. But, when they begin to break down, it can cause water leaks around your windows. Not only is a leaky window unpleasant however, it could also cause significant structural damage to your home's structure. It is important to identify a problem early and have it fixed by a professional before it worsens.
The cause of windows that leak is usually not in the glass, but rather on the frame or sill. This is the most typical sign of a leaky seal. It could be due to damage to the seal due to weather or aging wear-out caulking, or even a blocked drain that results in the accumulation of ice or water.
Another common sign of a damaged window seal is water appearing between the panes of your double-glazed windows. This is not as dangerous as a leak of water because the water does not travel as far to get into your home. However, it could mean that the inert gas sandwiched between the panes has lost its lubrication, which will lower the insulating value of your windows.
The final indication of a failing window seal is condensation between the panes. This may be caused by a failed window seal, or it could be the result of an unforgiving climate in your home or an issue with the glass. The condensation might not just be unpleasant, but it could also cause the growth of mould and mildew in your home that is difficult and costly to get rid of.
It's time for you to examine your double-glazed windows if observe these signs. Repairing or replacing your windows will help protect your home from water leaks, lower energy bills, and remove drafts. It's a minimal cost to pay for your family's comfort and safety. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our experienced professionals are happy to assist you! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A damaged seal on the double glazing can allow water to get into the insulating gap. This water could cause fogging or misting within the window panes.
If you notice condensation developing within your home, it's the perfect time to contact an experienced double glazing repair service. The condensation is a sign that the vacuum seal drawn by the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by variety of factors, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. There are several options for double glazing seal repairs However, it is crucial that the new seals are properly sized in order to ensure a perfect seal and a snug fit.
Typically, the gaskets that are used to seal the gaps between your double-glazed units are made from a material such as polyurethane foam. They are designed to last for a long time but they can perish in time due to wear and tear as well as exposure to different temperatures and weather conditions throughout the year.
As time passes the foam will shrink or crack. This could lead to a break in your seal, allowing moisture to seep into the double-glazed window. This can cause condensation and decrease in energy efficiency.
Re-sealing windows is one option to address this issue. This isn't a 100% solution as it will eliminate the condensation that is already present and not address the underlying problems that are causing the double-glazed window to leak or develop condensate.
Another solution is to replace your windows completely. This should be done by a professional who offers an insurance-backed guarantee. This means that in the event that the company fails or is shut down, you'll remain covered by the insurance. It's important to know that your replacement windows must be warranted for at least 10 years.
Misting
Check that your double-glazing seals are in good condition as autumn approaches. Window seals that are damaged can affect the properties of your windows' insulation as well as cause condensation, dampness and mold. It is essential to address any problems with your double-glazed windows as soon as you can to avoid further damage and save on energy bills.
A typical double-glazed window is made from two glass panes that are joined by an internal space filled with gas. An outer sealant layer then fills the gap between the uPVC frame and the glass. This is essential to maintain the airtight seal that keeps cool and warm air from your home and helps you save money on your heating costs. However, over time, these seals can fail due to age and weather conditions, or poor installation. After this the encapsulation formula that makes double glazed windows so efficient can begin to lose its effectiveness.
If damaged or faulty seals aren't repaired they can cause dampness and condensation that can impact your health as well as the appearance of your window. The presence of mould and damp not only causes damage to your walls, floors and ceilings, but also cause allergens and irritants within your home, which can cause harm to you and your family's health.
One of the most common issues that can occur with your double glazing is the possibility of misting between the panes. This occurs when moisture gets into that insulated section of your window and is quite difficult to resolve without expert help with repair of your seal.
There are DIY ways to tackle this issue, however, we'd advise against it because it's not just risky but can be extremely hazardous and damage your windows. These methods involve drilling holes into your glazed unit and using chemicals to remove fog & condensation. This could cause a number of complications, including exposing your windows and units to water damage.
Professional glaziers have the tools as well as the skills and experience to safely reseal uPVC frames. They also can offer you long-lasting results. They can also provide suggestions on how to properly keep your uPVC window in good condition to avoid any future issues.
Draughts
A draft coming from your window is a sign that the sealant may have been damaged. It should be repaired or replaced. This will stop the cold air getting into your home, improve the efficiency of your energy and reduce heating costs and make a difference to comfort levels and temperature control.
It is also important to note that not all drafts originate from the window seals but from the gap between the frame and bricks. In some instances, it can be possible to fix the issue by simply filling the gap by caulking it with silicone. If this is not successful it will require resealing professionally.
When the sealant around double-glazed windows starts to breakdown, it allows water ingress. This can result in damp or even mold. This can cause harm to health, and cause damage to property. It is important to address any water ingress problems when you spot them. And if your windows are still under guarantee it is worth checking with the company you bought windows from, since they could pay for the repairs.
The windows themselves are typically covered by a guarantee that can be at least 10 years however some companies offer lifetime warranties - therefore it is worthwhile checking this information out. If your double-glazed windows are under warranty, it's worth contact the company you bought them from as soon as possible and providing them with the details of any issues that you're experiencing. It is recommended to contact the company in person or by email and letter. double glazing window repairs will ensure that everything is clearly documented and easily understood.
It is also worth noting that draughts can often be caused by faulty hinges rather than an ineffective seal. The hinges are located close to the window sash which is the part that you open. If they are not oiling them regularly and become stiff, they may develop. This can create a gap between the sash and the frame which could allow cold air in. Replacing the hinges will fix this issue, without affecting window seals.